Specifications

Eberspacher Cobitronic Heater
This is a diesel fuelled combination heating system
incorporating the latest technology to provide hot water
and air heating from the unit located under the vehicle.
Diesel is drawn from the vehicles own fuel tank, with the
option to combine and utilise mains voltage when available.
On / Off Button
This button is used to turn the unit on and off. The button
must be pressed for approximately 2 seconds to operate.
This is to stop accidental operation whilst using the heating
system.
Up / Down Buttons
These buttons are used to mainly for adjusting the
temperature up and down, but in some instances they
are used to select certain menu options.
Enter Button
This button is used to enter a selection. This button is
generally used in the setup menus and is not needed for the
day to day operation of the unit. Momentarily pressing the key
will display the temperature level selected (in degrees C).
Press and hold this button, whilst in a menu, to return to a
previous screen.
Heating and Hot Water Button
This button is used to turn the heating on or off. An LED next
to the button will indicate that the heating is on.
Note: when using the timer functions, the LED shows that
the heating will come o at the programmed time. Hot water
is also selected with the heating.
Water Heating Button
Pressing this button means that the heater will operate the
water heating only, not the air heating system.
Economy Button
This button overrides the normal heating function and is for
use when energy needs to be saved. In this mode the fan
speed is reduced and the water is electrically heated at a
reduced power rate to minimise (mains) current
consumption.
Note: this mode only works on mains hook up. The LED next
to the button illuminates when this mode is in operation.
26
8. Diesel Heating System
Cobitronic Heater Control Panel
Final 2006 AT Handbook 1/12/05 12:06 pm Page 26