User manual

84
Section 5 MC-III™ EXP Flow Analyzer
Figure 5.8—Print preview, trend view
To save the report, perform the following steps:
1. Select File>Save from the task bar (Figure 5.8). A “Save Report As” window will open (Figure 5.9).
2. Enter a lename. The lename extension will be .rps.
3. Click “Save.” By default, log archive reports are saved in C:\NuFlo log data\MC-III\<WELL NAME>.
However, the user can specify a new location, if desired. The “wellname” folder will bear the well name
that appears on the Wellsite Information screen. If no well name is entered on this screen, the folder will
be named “NO_WELLNAME.”
Figure 5.9—Save Report As screen