User manual

Section 4 MC-III™ EXP Flow Analyzer

Advanced Access

System congurators and host programmers can also access the software through the Advanced Access menu

(Figure 4.40). This option provides access to the Modbus

registers for the MC-III EXP. A series of tabs on

the right side of the screen (real time, input conguration, output conguration...) allows the user to view a

specic group of registers, or to view all registers in one list.

Important: The Advanced Access option is not required for the routine operation of the MC-III EXP,

and novice users should not access this portion of the software unless instructed to do

so by Cameron technical support personnel.

Data retrieved from the MC-III EXP while in Advanced access mode can be logged to a le by enabling the

“Automatically log data polls” checkbox on the Advanced Options screen (Figure B.6, page B-6). The le will

include values that are retrieved from the instrument when the user clicks the “Get All Data” button or enables

“Auto Polling” on the Advanced Access screen. See also Automatic Data Logging, page B-6.

Figure 4.40—Advanced Access screen