User manual

Section 4 MC-III™ EXP Flow Analyzer

2. Click “Save.” An “Information” window will appear to conrm that the le has been saved.

The “wellname” folder will bear the well name that appears on the Wellsite Information screen. If no well

name is entered on this screen, the folder will be named “NO_WELLNAME” (Figure 4.36, page 75).

Uploading a Conguration File

To upload a conguration le, perform the following steps:

1. From the Main screen, select File>Return to Welcome Screen (Figure 4.37).

2. Click on the LCD to connect to the MC-III EXP.

3. Click “Upload a conguration” (Figure 4.38, page 77) and click “Do It Now.” A “Load MC3 Conguration

File” window will appear (Figure 4.39, page 77), displaying the contents of the MC-III folder.

4. Click on the appropriate well name folder, select the conguration le of your choice, and click “Open.”

A “Progress” window will appear momentarily, followed by an “Information” window conrming the

upload.

Figure 4.37—File dropdown menu allows user to return to the Welcome screen