User manual

MC-III™ EXP Flow Analyzer Section 4

Saving and Uploading Conguration Files

The MC-III EXP allows a user to save conguration settings in a le that is stored on the user’s computer and

can be uploaded to the MC-III EXP as needed. Conguration les are easily identied by the .mc3 extension.

The default lename begins with “cong” and uses the following structure:

File Format Filename Structure

.mc3 “cong”<date (YYMMDD)> <time (hhmmss)>.mc3

Example: cong050209133922.mc3 is a conguration le that was

downloaded on February 9, 2005 at 1:39:22 p.m.

Saving a Conguration File

To save current conguration settings for future reference, perform the following steps:

1. Select File>Save Conguration File (Figure 4.35). A “Save MC3 Conguration File” screen (Figure 4.36)

will appear, prompting the user to save the le to the computer hard drive. The default directory is C:\Nu-

Flo log data\MC-III\<WELL NAME>, however the user can specify a new location, if desired.

Figure 4.35—File dropdown menu allows user to save a conguration le

Figure 4.36—Default directory for conguration les