Specifications

14
Section 3
Sound Card Interface Connections for the PK-900/PSK
The Sound Card interface connections are made to the gold connectors labeled “SOUND
CARD AUDIO” on the back of the PK-900/PSK. Timewave supplies cables to connect
the sound card to the PK-900/PSK. The cables are supplied with each PK-900/PSK and
upgrade kit. This connection information is provided for the user’s convenience.
PK-900/PSK Connection
TO To Sound Card Audio input.
INPUT Insert phone plug into sound card input jack (blue ring around
jack on most sound cards). Use the mic jack input (pink) if
you need more gain.
The phone plug tip and ring are the signal connections. The
tip is the factory default connection. To select the ring use
Jumper JH1 on the Jack PC board mounted on the back panel.
Phone plug sleeve is the signal return connection.
FROM From Sound Card Audio Ouput (to transmitter audio input)
OUTPUT Insert phone plug into sound input card jack (green ring
around jack on most sound cards).
The phone plug tip and ring are the signal connections. The
tip is the factory default connection. To select the ring use
Jumper JH2 on the Jack PC board mounted on the back panel.
Phone plug sleeve is the signal return connection.
TO Plug computer speaker into this jack. It is a parallel connection
SPKRS to the” FROM OUTPUT “ jack, so that you don’t have to have
a separate “Y” connector to plug in your computer speakers.