Specifications

________________________________________________________________________________
Unproto call1 [VIA call2[,call3..,call9]]/call1 [VIA call2[,call3..,call9]]
Default: CQ/CQ
Mode: Packet Host: UN
_________________________________ Parameters: __________________________________
call1 - Call sign to be placed in the TO address field.
call2-9 - Optional digipeater call list, up to eight calls.
________________________________________________________________________________
UNPROTO sets the digipeat and destination address fields of packets sent in the
unconnected (unprotocol) mode.
Unconnected packets are sent as Unnumbered I-frames (UI frames) with the
destination and digipeat fields taken from "call1" through "call9" options.
When a destination is not specified, unconnected packets are sent to "CQ."
Unconnected packets sent from other packet stations can be monitored by setting
MONITOR to a value greater than "1" and setting MFROM to ALL.
The UNPROTO path and address is also used for beacon packets.
________________________________________________________________________________
USers "n/n" Default: 1/1
Mode: Packet Host: UR
_________________________________ Parameters: __________________________________
"n" - 0 to 10 specifies the number of active simultaneous connections that
can be established with your PK-900.
________________________________________________________________________________
USERS affects the way that incoming connect requests are handled on each Radio
Port of the PK-900. It does not affect the number of connections you
initiate with your PK-900. For example:
USERS 0 allows incoming connections on any free logical channel
USERS 1 rejects incoming connections if there are connections on 1 or
more logical channels.
USERS 2 rejects incoming connections if there are connections on 2 or
more logical channels.
And so on, through USERS 10.
3/93 A-105