Specifications

________________________________________________________________________________
RESTART Immediate Command
Mode: Command Host: RT
________________________________________________________________________________
RESTART is an immediate command that reinitializes the PK-900 while retaining
the user's settings. The effect of the RESTART command is the same as turning
the PK-900 OFF, then ON again.
RESTART does not reset the values in bbRAM. See the RESET command.
________________________________________________________________________________
REtry "n/n" Default: 10/10
Mode: Packet Host: RY
_________________________________ Parameters: __________________________________
"n" - 0 to 15 specifies the maximum number of packet retries.
________________________________________________________________________________
The AX.25 protocol uses the retransmission of frames that have not been
acknowledged as a means to insure that ALL transmitted frames are received.
The number of retries that the PK-900 will attempt is set by the RETRY command
(default 10). If the number of retries is exceeded, the packet link may be
lost. The number of retries allowed on each Radio Port may be selected.
_______________________________________________________________________________
RFec ON|OFF Default: ON
Mode: AMTOR Host: RF
_________________________________ Parameters: __________________________________
ON - Mode B (FEC) signals are displayed in AMTOR Standby (default).
OFF - Mode B (FEC) signals are not displayed in AMTOR Standby.
________________________________________________________________________________
Turn the RFEC command OFF to prevent the reception and display of all FEC
signals received while in AMTOR Standby.
1/93 A-89