Specifications

________________________________________________________________________________
MXmit ON|OFF Default: OFF
Mode: Packet Host: Mx
_________________________________ Parameters: __________________________________
ON - Monitor transmitted packets in the same manner as received packets.
OFF - Do not monitor transmitted packets.
________________________________________________________________________________
When MXMIT is ON, transmitted packets are monitored in the same manner as
received packets. The monitoring of transmitted packets is subject to the
settings of MONITOR, MCON, MFROM, MTO, MRPT and TRACE. Most transmitted packets
occur during connections so MCON should probably be set to a non-zero value.
________________________________________________________________________________
MYAlias call[-n]/call[-n] Default: none/none
Mode: Packet Host: MA
_________________________________ Parameters: __________________________________
call - Alternate packet digipeater identity of your PK-900
"n" - 0 to 15, an optional substation ID (SSID)
________________________________________________________________________________
MYALIAS specifies an alternate call sign (in addition to the call sign specified
in MYCALL) for use as a digipeater only. a MYALIAS In some areas wide-coverage
digipeater operators change their call sign to a shorter and easier to remember
identifier.
________________________________________________________________________________
MYALTcal aaaa Default: none
Mode: AMTOR Host: MK
_________________________________ Parameters: __________________________________
aaaa - Your alternate SELective CALling code (SELCALL)
________________________________________________________________________________
Use the MYALTCAL command to specify an your alternate SELCALL which, under
certain conditions, may be convenient or necessary. You can enter an additional
SELCALL code not related to your call sign. The alternate SELCALL can be any
four alphabetical characters, or can be numeric strings of either four or five
numbers. MYALTCAL is generally used for special applications such as receiving
network or group broadcasts in AMTOR Mode B Selective (Bs or SELFEC).
1/93 A-72