Specifications

________________________________________________________________________________
HBaud "n/n" Default: 1200/1200 bauds
Mode: Packet Host: HB
_________________________________ Parameters: __________________________________
"n" - values specifying the Packet data rate in bits per second from each
Radio Port of the PK-900 to the radio.
________________________________________________________________________________
HBAUD sets the radio ("on-air") baud rate only in the Packet operating mode for
each Radio Port. The default is 1200 bits/sec (VHF) for Radio Port 1 and 0
(disabled) on Radio Port 2.
HBAUD has no relationship to your computer terminal program's baud rate.
Available HDLC packet data rates "n" include 45, 50, 57, 75, 100, 110, 150, 200,
300, 400, 600, 1200, 2400, 4800 and 9600 bauds.
________________________________________________________________________________
HEAderln ON|OFF Default: ON
Mode: Packet Host: HD
_________________________________ Parameters: __________________________________
ON - The header in a monitored packet is printed on a separate line from
the text.
OFF - The header and text of monitored packets are printed on the same line.
________________________________________________________________________________
When HEADERLN is ON (default), the address is shown, followed by a <CR><LF> that
puts the packet text on a separate line as shown below:
WX1AAA>WX2BBB:
Go ahead and transfer the file.
HEADERLN affects the display of monitored packets. When HEADERLN is OFF, the
address information is shown on the same line as the packet text as shown below:
WX1AAA>WX2BBB: Go ahead and transfer the file.
1/93 A-53