Specifications

________________________________________________________________________________
DISPlay [class] Immediate Command
Mode: Command Host: Not Supported
_________________________________ Parameters: __________________________________
class - Optional parameter identifier, one of the following:
(A)sync display asynchronous port parameters
(B)BS display AMTOR and Packet MailDrop parameters
(C)haracter display special characters
(F)ax display Facsimile parameters
(I)d display ID parameters
(L)ink display link parameters
(M)onitor display monitor parameters
(Q)Modem display MODEM default parameters
(R)TTY display RTTY parameters
(S)tep display Step parameters
(T)iming display timing parameters
(Z) display the entire command/parameter list
________________________________________________________________________________
DISPLAY is an immediate command. When DISPLAY is typed without a parameter, the
PK-900 responds with a short list of often used parameters.
(See also DISPLAY A,B,C,F,I,L,M,R,T,Z)
Connect Link state is: DISCONNECTED
Opmode PAcket
FRack 5/5 (5 sec.)
HBaud 1200/1200
MAXframe 4/4
Monitor 4/4 (UA DM C D I UI)
MYcall PK900/PK900
MYSelcal none
PACLen 128/128
RBaud 45
TXdelay 30/30 (300 msec.)
Vhf ON/ON
You can display subgroups of related parameters by specifying the optional class
parameter. For example, to display the MailDrop parameters type:
disp b
3Rdparty OFF
FREe 16996
KILONFWD ON
LAstmsg 0
MAildrop OFF
MDMon OFF
MDPrompt Subject:/Enter message, ^Z (CTRL-Z) or /EX to end
MMsg OFF
MTExt Welcome to my AEA PK-900 maildrop.
Type H for help.
MYMail none
TMail OFF
TMPrompt GA subj/GA msg, '/EX' to end.
Command names are shown with UPPER-CASE letters indicating the minimum number of
characters required for the command. The lower-case letters indicate the
(optional) rest of the command name.
1/93 A-45