Specifications

________________________________________________________________________________
CRAdd ON|OFF Default: OFF
Mode: Baudot RTTY Host: CR
_________________________________ Parameters: __________________________________
ON - Send <CR CR LF> in Baudot RTTY.
OFF - Send <CR LF> in Baudot RTTY (default).
________________________________________________________________________________
The CRADD command permits you to set the PK-900's "newline" sequence so that
an additional carriage return is ADDed automatically at the end of a typed line.
When CRADD is ON the line-end sequence is <CR><CR><LF>. When CRADD is OFF the
line-end sequence is <CR><LF>. The double carriage return is required in some
RTTY services such as MARS. CRADD has no effect on received data.
________________________________________________________________________________
CStatus [Short] Immediate Command
Mode: Packet Host: Not Supported
________________________________________________________________________________
CSTATUS is an immediate command helpful in multiple connections.
When CSTATUS is typed, your monitor displays Link State of all ten logical
channels on Radio Port 1 (designated 0-9) and all 26 logical channels on Radio
Port 2 (designated A-Z) as well as the current input/output channel as follows:
NOT CONNECTED TO ANY STATION CONNECTED TO TWO STATIONS
cmd:cs cmd:cs
Ch. 0 - IO DISCONNECTED Ch. 0 - IO CONNECTED to WX1AAA
Ch. 1 - DISCONNECTED Ch. 1 - DISCONNECTED
Ch. 2 - DISCONNECTED Ch. 2 - DISCONNECTED
Ch. 3 - DISCONNECTED Ch. 3 - DISCONNECTED
Ch. 4 - DISCONNECTED Ch. 4 - DISCONNECTED
Ch. 5 - DISCONNECTED Ch. 5 - DISCONNECTED
Ch. 6 - DISCONNECTED Ch. 6 - DISCONNECTED
Ch. 7 - DISCONNECTED Ch. 7 - DISCONNECTED
Ch. 8 - DISCONNECTED Ch. 8 - DISCONNECTED
Ch. 9 - DISCONNECTED Ch. 9 - DISCONNECTED
Ch. A - DISCONNECTED Ch. A - CONNECTED to WX7BBB
. .
. .
Ch. Z - DISCONNECTED Ch. Z - DISCONNECTED
CSTATUS will give a short display if desired. CSTATUS SHORT (or CS S) displays
only the current input/output channel or those channels which are connected.
This form of the command is useful to remind you which Radio Port the PK-900
considers to be active. For example, lets say that yesterday your last Packet
Connect occurred on Radio Port 2, typing the CSTATUS Short command would show
the following:
Ch. A - IO DISCONNECTED
This means that if you want to send data to Radio Port 1, you must first select
is with the CHSWITCH character as described in Chapter 4 of this manual.
1/93 A-40