Specifications

________________________________________________________________________________
COMmand "n" Default: $03 <CTRL-C>
Mode: All Host: CN
_________________________________ Parameters: __________________________________
"n" - 0 to $7F (0 to 127 decimal) specifies an ASCII character code.
________________________________________________________________________________
COMMAND changes the Command Mode entry character (default <CTRL-C>). Type the
COMMAND character to enter Command Mode from the Converse, Transparent or HOST
Modes. The Command prompt (cmd:) appears, indicating successful entry to
Command Mode.
See the CMDTIME command for related information.
________________________________________________________________________________
CONMode CONVERSE|TRANS Default: CONVERSE
Mode: Packet, AMTOR and PACTOR Host: CE
_________________________________ Parameters: __________________________________
CONVERSE- Your PK-900 enters Converse Mode when a Packet connection or AMTOR
Link is established.
TRANS - Your PK-900 enters Transparent Mode when a Packet connection or
AMTOR Link is established.
________________________________________________________________________________
CONMODE selects the mode your PK-900 uses after entering the CONNECTED Packet
state, or Linked ARQ AMTOR state.
For most packet and AMTOR operation, setting CONMODE to CONVERS (default) is
most natural.
3/93 A-37