Specifications

________________________________________________________________________________
AFilter ON|OFF Default: OFF
Mode: ALL Host: AZ
_________________________________ Parameters: __________________________________
ON - The ASCII characters specified in the MFILTER are filtered out and
never sent to the terminal or computer.
OFF - Characters in MFILTER list are only filtered from monitored packets.
________________________________________________________________________________
Some terminals and computers use special characters to clear the screen or
perform other "special" functions. Placing these characters in the MFILTER
list, and turning AFILTER ON will keep the PK-900 from sending them.
Exception: When ECHO is ON, and the terminal or computer sends a filtered
character, the PK-900 will echo it back to the terminal or computer.
AFILTER works regardless of mode, or CONNECT/CONVERSE/TRANSPARENT status.
One must be careful to leave AFILTER OFF during Binary file transfers.
________________________________________________________________________________
ALFDisp ON|OFF Default: ON
Mode: All Host: AI
_________________________________ Parameters: __________________________________
ON - A line feed character <LF> IS sent to the terminal after each <CR>.
OFF - A <LF> is NOT sent to the terminal after each <CR>.
________________________________________________________________________________
ALFDISP controls the display of carriage return characters received, as well as
the echoing of those that are typed in.
When ALFDISP is ON (default), your PK-900 adds a line feed <LF> to each
carriage return <CR> received, if needed. If a line feed was received either
immediately before or after a carriage return, ALFDISP will not add another line
feed. Use the PK-900's sign-on message to determine how carriage returns are
being displayed. ALFDISP affects your display; it does not affect transmitted
data.
Set ALFDISP ON if the PK-900's sign-on message lines are typed over each
other. Set ALFDISP OFF if the PK-900's sign-on message is double spaced.
ALFDISP is set correctly if the PK-900's sign-on message is single spaced.
1/93 A-14