Instruction manual

Chapter 4 Menu Settings 4-59
Chapter 4 Menu Settings
4-5 VIDEO Menu
prst, 0.0 to 141.3%
[F2]
Button
Indication
Settings
Selects the reference signal for
output.
ext, input, auto
[F4]
Adjusts the Y, PB, and PR output levels
simultaneously.
[F5] Adjusts the Y output level.
prst, 0.0 to 141.3%
[F6] Adjusts the P
B output level.
prst, 0.0 to 141.3%
Function
Adjusts the PR output level.
Adjusts the setup level.
prst, –10.0 to +10.0
[F8]
prst, 0.0 to 141.3%
P
B (HD)
SERVO REF
MASTER (HD)
Y (HD)
P
R (HD)
SETUP (HD)
[F9] Adjusts the sync phase.
prst, –128 to +127
SYNC (HD)
[F10]
FINE (HD)
Fine adjustment of the sync phase
prst, 0 to 1024
ALT/[F1] Adjusts the Y, B-Y, and R-Y output
levels simultaneously.
prst, 0.0 to 141.3%
MASTER LEVEL (D1)
[F7]
ALT/[F2]
Y LEVEL (D1)
Adjusts the Y output level.
prst, 0.0 to 141.3%
ALT/[F3]
B-Y LEVEL (D1)
Adjusts the B-Y output level.
prst, 0.0 to 141.3%
ALT/[F4] R-Y LEVEL (D1) Adjusts the R-Y output level.
prst, 0.0 to 141.3%
ALT/[F8]
SETUP LEVEL (CST)
Adjusts the setup level.
prst, 0 to +10.0
In the VIDEO menu, adjust the video signal. The
VIDEO menu screen shows the VTR operating mode,
current position time code, time code type, and so on.
About HD image quality adjustments
When playing back tapes recorded in Y/P
B/PR (4:2:2)
format, HD image quality adjustments are enabled for
the HD SDI OUTPUT 1, 2, and MONITOR
connectors.
LTC
TCR
INTRP DF F2
SERVO
REF
MASTER
(HD)
Y
(HD)
PR
(HD)
SETUP
(HD)
SYNC
(HD)
FINE
(HD)
PB
(HD)
00H 00M 00S 00F
AIN --:--:--:-- AOUT --:--:--:--
IN --:--:--:-- OUT --:--:--:--
TAPE LOCK
Note
HD image quality adjustments are not possible when
playing back tapes recorded in GBR (4:4:4) format.
Also, HD image quality adjustments are not possible
when the optional HKSR-5001 Format Converter
Board is installed and Y/P
B/PR (4:2:2) format signals
are output from the FORMAT CONV. OUT
(OPTION) 1 and 2 connectors.
To access the VIDEO menu screen
Press the VIDEO button.