Instruction manual

3-4 Chapter 3 Setting Up the VTR
3-2 Reference Signals
Chapter 3 Setting Up the VTR
This section describes how reference signals for the
video output are selected.
3-2-1 Reference Signals for Output Video
Depending on the operating condition, VTR SETUP
menu settings, the input signal, and the video output
signal from the VTR can be synchronized as follows.
3-2 Reference Signals
Start
What is the setting of
the VTR SETUP menu item
005 “SERVO/AV
REFERENCE select”?
ext.
auto
input
Is the VTR currently
recording or is EDIT
PRESENT on?
Yes
No
What is the setting of
the VTR SETUP menu item
006 “EXTERNAL REFERENCE
select”?
extrn SD
extrn HD
Is there a signal of the correct
frequency on the REF. INPUT
1 or 2
a)
connector?
Yes
No
Synchronization with
the reference video
signal input to the
REF. INPUT 1 or 2
a)
connector
No external synchronization (synchronization is internal)
Is there a signal of the correct
frequency on the REF.
INPUT 1 or 2
a)
connector?
Yes
No
Synchronization with
the video signal input
to the REF. INPUT 1
or 2
a)
connector
Is there an input signal
on the HD SDI INPUT
connector?
Yes
No
Synchronization with
the video signal input
to the HD SDI INPUT
connector
a) The signal on the REF. INPUT 2 connector is the signal
for FORMAT CONV. output. Use the “A08: FC
REFERENCE select” menu item to switch between HD
and SD for the signal input to the REF. INPUT 2
connector.