Instruction manual

Chapter 6 Editing 6-17

Chapter 6 Editing

6-3 Manual Editing

Follow the procedure below to perform manual

editing.

1 Enter jog or shuttle mode to position the tape at a

place at least three seconds before the position at

which you want to set an edit point.

2 Press the AUTO button to turn it off.

3 Press the [F3] (ASSEMBLE) button in the HOME

menu or press the respective INSERT button ([F4]

(INS TC), [F5] (INS VIDEO) or [F6] (INS

AUDIO) button) to select the edit mode that you

want.

4 Press the PLAY button.

Playback starts.

5 Press the REC/EDIT button at the point where you

want to start editing (IN point).

The REC/EDIT button lights, and editing starts.

6 Press the REC/EDIT button where you want to end

editing (OUT point).

Editing ends, but the tape continues to run in

playback mode.

7 Press the STOP button to stop the tape.

Note

To ensure a stable picture, start playback at least three

seconds before the IN point.

4 5,67