Instruction manual

4-6 AUDIO Menu
4-66 Chapter 4 Menu Settings
Chapter 4 Menu Settings
2 Press [F9] (SD OUT EXCHNG) to set the display
to “ena”.
ena: Enable the settings of this menu.
dis: Disable the settings of this menu, and use the
settings for CH1 to CH8 of DIGOUT
EXCHNG.
3 Select the digital audio output signal for each
channel.
TR1 to TR2: Output the audio signals recorded on
tracks 1 to 12.
4 Press the [F10] (EXIT) button.
This returns to the AUDIO menu.
Making output settings for individual channels
with the F buttons.
By pressing any of the [F1] (SDOUT CH1 TR1) to
[F8] (SDOUT CH8 TR8) buttons, you can select the
source track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1 Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2 Press the cursor R or r button, to select the source
channel to be output.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
You can also make this setting using the VTR SETUP
menu item 836 “SD AUDIO OUTPUT EXCHANGE”.
SD OUT
CH1
TR1
SD OUT
CH2
TR2
SD OUT
CH3
TR3
SD OUT
CH4
TR4
SD OUT
CH5
TR5
SD OUT
CH7
TR7
SD OUT
CH8
TR8
SD OUT
EXCHNG
dis
EXITSD OUT
CH6
TR6
SD AUDIO OUTPUT EXCHANGE
CH1
TR1
CH2
TR2
CH3
TR3
CH4
TR4
CH5
TR5
CH6
TR6
CH7
TR7
CH8
TR8