Instruction manual

4-6 AUDIO Menu
4-64 Chapter 4 Menu Settings
Chapter 4 Menu Settings
4-6-1 Selecting the Audio Input
Signal (AUDIO IN)
To select the audio input signal for CH1 to CH12, use
the following procedure.
CH1 to CH12 can be selected for HDCAM-SR, and
CH1 to CH4 can be selected for HDCAM.
1 Press the [F1] (AUDIO IN) button.
The AUDIO INPUT menu appears, together with
an audio input selection window.
2 Select the audio input signal for each channel.
SDI: audio signal input from the HD SDI INPUT
A/B connector
AES/EBU: audio signal input from the DIGITAL
I/O (AES/EBU) INPUT connector
3 Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
Making settings for individual channels with
the F buttons
By pressing any of the [F1] (A-IN CH1) to [F8] (A-IN
CH8) buttons in the AUDIO INPUT menu, and in the
ALT+AUDIO screen obtained by pressing the ALT
button, the [F1] (A-IN CH9) to [F4] (A-IN CH12)
buttons, you can select the type of input signal for each
channel.
Making input signal selections for individual
channels with the numeric buttons
1 Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2 Press the cursor R or r button, to select the signal.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
To select the same input signal
simultaneously on all twelve channels
Press the [F9] (A-IN ALL) button to change the input
signal simultaneously on all twelve channels.
You can also make this setting using the VTR SETUP
menu item 830 “AUDIO INPUT SELECT”.
4-6-2 Digital Audio Output
Signal Source Track Selection
(DIGOUT EXCHNG)
To make the source track selection for the digital audio
output signal (audio multiplexed with HDSDI and
SDSDI (1 to 8 channels), and AES/EBU audio output
are targeted) on each of channels 1 to 12, use the
following procedure.
Note that when [F9] (SD OUT EXCHNG) in the
SDOUT menu is set to “ena”, SDSDI source track
selection follows the settings of the SDOUT menu.
1 Press the [F3] (DIGOUT EXCHNG) button.
The DIGOUT menu appears, together with a
source track selection window for the digital audio
output signals.
2 Carry out the source track selection for the digital
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3 Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
DIGOUT
CH1
TR1
DIGOUT
CH2
TR2
DIGOUT
CH3
TR3
DIGOUT
CH4
TR4
DIGOUT
CH5
TR5
DIGOUT
CH7
TR7
DIGOUT
CH8
TR8
EXITDIGOUT
CH6
TR6
AUDIO OUTPUT EXCHANGE
CH1
TR1
CH2
TR2
CH3
TR3
CH4
TR4
CH5
TR5
CH6
TR6
CH7
TR7
CH8
TR8
CH9
TR9
CH10
TR10
CH11
TR11
CH12
TR12
A-IN
CH1
AES/EB
A-IN
CH2
AES/EB
A-IN
CH3
SDI
A-IN
CH4
SDI
A-IN
CH5
SDI
A-IN
CH7
SDI
A-IN
CH8
SDI
A-IN
ALL
.....
EXITA-IN
CH6
SDI
AUDIO INPUT SELECT
CH1
A/E
CH2
A/E
CH3
SDI
CH4
SDI
CH5
SDI
CH6
SDI
CH7
SDI
CH8
SDI
CH9
SDI
CH10
SDI
CH11
SDI
CH12
SDI