Instruction manual

Chapter 4 Menu Settings 4-63
Chapter 4 Menu Settings
4-6 AUDIO Menu
In the AUDIO menu, make audio signal adjustments.
The AUDIO menu screen shows the VTR operating
mode, current position time code, time code type, and
so on.
AUDIO
IN
-
DIGOUT
EXCHNG
-
ANAOUT
EXCHNG
-
SDOUT
EXCHNG
-
00 01M 56S 27F
AIN --:--:--:-- AOUT --:--:--:--
IN --:--:--:-- OUT --:--:--:--
INTRP DF F2
LTC
TCR
TAPE LOCK
To access the AUDIO menu screen
Press the AUDIO key.
Display when audio output channel
settings do not match track number
settings
• As shown below, “EXCHNG” is displayed if even
one of the HDSDI, AES/EBU, ANALOG, SDSDI
output channels does not match the corresponding
track number.
• The [F3] button in the AUDIO menu is highlighted
in orange if even one of the HDSDI/AES/EBU audio
output channels does not match the corresponding
track number on the tape.
In this case, if SDOUT EXCHNG is set to “dis”, the
[F5] button is also highlighted in orange.
• The [F4] button in the AUDIO menu is highlighted
in orange if even one of the ANALOG audio output
channels does not match the corresponding track
number on the tape.
• The [F5] button in the AUDIO menu is highlighted in
orange if even one of the SDSDI audio output
channels does not match the corresponding track
number on the tape.
Button Indication Function Settings
[F1] AUDIO IN Accesses the AUDIO INPUT menu SDI, AES/EBU
[F3] DIGOUT EXCHNG Digital audio output signal source track selection TR1 to TR12
(HDSDI, SDSDI, AES/EBU)
However, [F5] (SDOUT EXCHNG) can be used to set
SDSDI source tracks independently.
[F4] ANAOUT EXCHNG Analog audio output signal source track selection TR1 to TR12
[F5] SDOUT EXCHNG Digital audio output signal source track selection dis, ena, TR1 to TR12
(SDSDI)
ALT/[F1] AUDIO EDIT Audio transition type selection for digital audio editing cross, fi/fo, cut
ALT/[F2] FADE TIME Fade time selection 5 ms to 115 ms
ALT/[F3] REPLACE MODE CH1 to CH8 assignment settings in response to an
external digital audio preset command
ALT/[F4] ANALOG REPLACE CH9 to CH12 assignment settings in response to an
external analog audio preset command
PB/EE
EE
CTL
NDF
STANDBY OFF
RECINH
off
ASSEN-
BLE
off
INS
TC
off
INS
VIDEO
off
INS
CUE
off
INS
AUDIO
-
STILL HDCAM-SR
SS
REMAIN:--H--M
HOME
00 H 00 M 00 S 00 F
AIN --:--:--:-- AOUT --:--:--:--
IN --:--:--:-- OUT --:--:--:--
00 H 29 M 21 S 05 F
INTRP DF
EXCHNG
2FO
LTC
TCR
“EXCHNG” display