Service manual

3. DIAGNOSTIC CHECK
3.8 Service Manual BSM-4100
Performing Manual Check and Other Checks
The following checks are available.
Power ON
CPU CHECK CRTC CHECK
DPU CHECK
COM CHECK
ROM Check
RAM Check
Hard Key Check
Touch Key Check
Sound Check
COM RAM Check
Alarm Indicator
Check
Other Check
Memory Card Check
ATA Card Check
Back Light Check
Character Memory
Check
Graphic Memory
Check
Graphic Draw Check
ASCII Draw Check
Image Draw Check
Report Draw Check
D/A adjust
AD test
AUX I/F Check
NIBP Check
ROM Check
RAM Check
COM RAM Check
WS Recorder
Check
Serial I/F Check
Network Card
Check
Multi Parameter
Unit Check
ECG Check
EXT I/F Check
In most of these checks, if a fatal error is detected during the check, the operating system hangs. When the system hangs, turn
off the instrument and remove the cause.
MANUAL CHECK
DIAGNOSTIC CHECK
SYSTEM SETUP SYSTEM INITIALIZE ERROR HISTORY
TOUCH PANEL CALIBRATION
Recorder and
Control Block
Checks
SELF-TEST-PRO
No. 1
SELF-TEST PRO
No. 2
SELF-TEST PRO
No.3
With the SILENCE ALARMS key pressed
Press the MENU key
With the record key and NIBP
INTERVAL key pressed until the
patient monitoring screen appears