Service manual

3. DIAGNOSTIC CHECK
Service Manual BSM-4100 3.7
Initializing the System
You can delete all stored waveforms and data and the error history and return all
settings to the factory defaults.
CAUTION
Initializing the system deletes all the patient data and error history, and
returns the setting conditions to their default settings.
1. From the DIAGNOSTIC CHECK screen, touch the “SYSTEM INITIALIZE” key
until a SYSTEM INITIALIZE confirmation message appears. (Approximately 3
seconds)
All data and user settings are deleted.
2. To exit the DIAGNOSTIC CHECK screen and return to the patient monitoring
mode, touch the “MONITOR MODE” key.