Service manual

1. GENERAL
1.20 Service Manual BSM-4100
NELLCOR
OxiMax
TM
Socket Panel
ECG/RESP socket
Connects to the ECG
connection cord.
SpO
2
socket
Connects to the SpO
2
connection cord.
NIBP socket
Connects to the air hose.
ECG/BP OUT socket
Outputs 100 mmHg/V IBP waveform of the IBP connected to the multi-parameter 1 socket,
1 mV/V ECG waveform and heart rate trigger by using the YJ-910P or YJ-920P ECG/BP output cable.
These analog signals can be used as the synchronization signal for other equipment, such as IABP or
defibrillator. Refer to the warning on the next page.
Multi-parameter sockets
Connect to the connection cord of the
parameter to be monitored (IBP,
temperature, CO, CO
2
, FiO
2
or
respiration by thermistor method).
The type of parameter is automatically
recognized. BSM-4101/4111 monitors
have two sockets and BSM-4103/4113
monitors have three sockets.
Refer to Warning and Note on the next page.
Refer to Warning and
Note on the next page.
Refer to Warning and Caution in the
"General Safety Information" in the
operator's manual.
Refer to Warning and Caution in the
"General Safety Information" in the
operator's manual.
On the BSM-4101/4103/4111/4113 Monitors
On the BSM-4102/4104/4112/4114 Monitors
Refer to Warning and Caution in the
“General Safety Information” in the
operator’s manual.
ECG/RESP socket
Connects to the ECG
connection cord.
Refer to Warning and Note
on the next page.
ECG/BP OUT socket
Outputs 100 mmHg/V IBP waveform of the IBP connected to the multi-parameter 1
socket, 1 mV/V ECG waveform and heart rate trigger by using the YJ-910P or YJ-920P
ECG/BP output cable. These analog signals can be used as the synchronization signal for
other equipment, such as IABP or defibrillator. Refer to the warning on the next page.
SpO
2
socket
Connects to the SpO
2
connection cord.
Multi-parameter sockets
Connect to the connection cord of the parameter to be
monitored (IBP, temperature, CO, CO
2
, FiO
2
or respiration by
thermistor method). The type of parameter is automatically
recognized. BSM-4102/4112 monitors have two sockets and
BSM-4104/4114 monitors have three sockets.
NIBP socket
Connects to the air hose.
Refer to Warning and Caution in
the “General Safety
Information” in the operator’s
manual.
Refer to Warning and Caution in the
“General Safety Information” in the
operator’s manual.
Refer to Warning and Note on
the next page.
When “NELLCOR OxiMax” is
indicated, MP506 SpO
2
module
is built in.