Service manual

1. GENERAL
Service Manual BSM-4100 1.19
No. Name Description
1 Alarm indicator
Red or orange lamp blinks according to the alarm settings. Green lamp blinks
in synchronization with the patient’s QRS.
2 Handle For carrying the instrument.
3 SILENCE ALARMS key Silences the alarm sound.
4 Function dial 1 and 2
Used for setting alarm limits and scrolling list or trendgraphs. When the
function dial lamp lights, the function dial is available.
5 NIBP INTERVAL key Selects NIBP measurement mode. Pressing this key changes the mode.
6 NIBP START/STOP key
Starts NIBP measurement in selected mode. Pressing the key during
measurement stops measurement.
7 MENU key Displays the MENU window.
8 HOME key Closes any opened window and displays the monitoring screen.
9 Socket panel Refer to the “Socket Panel” section.
10 Paper magazine Holds recording paper. (BSM-4101/4102/4103/4104 only)
11 Paper window
For checking the amount of recording paper.
(BSM-4101/4102/4103/4104 only)
12 Paper magazine release lever
Pull up the lever to open the paper magazine.
(BSM-4101/4102/4103/4104 only)
13 Touch screen
Displays monitoring data. Touching a key or data on the screen changes
displaying screen and settings.
14 Power switch
Press and hold for more than one second to turn the instrument power on or
off.
15 Power lamp Lights when the instrument power is turned on.
16 AC power lamp
Lights when the power cord is connected between the AC SOURCE socket
and AC outlet.
17 Battery power lamp Lights when operating on the battery power.
18 Battery charging lamp Lights or slowly blinks when charging.
19 Record key Press to start or stop recording.
20 Out of paper lamp
Blinks when out of paper. Lights when paper magazine is open.
(BSM-4101/4102/4103/4104 only)