Service manual

8. REPLACEABLE PARTS LIST
8.20 Service Manual BSM-4100
Index NK Code No. Qty Description
38 6114-106557 1 Swivel stopper
39 6114-106619A 2 Touch screen packing (long)*
5
40 6114-106628A 2 Touch screen packing (short)*
5
41 6114-106691B 1 Main chassis bottom holder
42 6114-106789 2 Dust protector (long)*
6
43 6114-106798 1 Dust protector (short)*
6
44 6114-107208 1 Earth spring with 2 holes (for monitors with revision number before CA)
45 6114-107217 2 Earth spring with 4 holes (for monitors with revision number before CA)
46 6114-107226 1 Earth spring with 5 holes (for monitors with revision number before CA)
47 6114-107877 2 Alarm indicator packing*
4
48 6114-107886 1 Inverter board insulation sheet*
3
49 6114-108181 1 Record key top cover
50 6114-108261 1 Insulation sheet for main chassis bottom holder*
7
51 6114-109438A 2 Rubber cap
52 6114-110098 1 Motherboard cushion sponge*
2
53 6114-110204 1 Silicon tube (115 mm long)
54 6114-110213 1 Silicon tube (150 mm long)
55 6114-112657 1 Shielding tape*
6
(for monitors with revision number before CA)
56 6122-004714A 1 Lower front enclosure
57 6124-025928 1 Nihon Kohden logo sheet
58 6124-031743 1 ZB-800P label
59 6124-032332 1 Battery label*
1
60 6141-000781B 1 Main chassis*
7
(for monitors with revision number before CA)
or 6141-900166A 1 Main chassis 4100N assy*
7
(for monitors with revision number CA or later)
61 6141-000807A 1 Upper front enclosure
62 6142-002233A 1 Side panel
63 6143-010249A 2 Shield sheet (left)
64 6143-010258A 1 Shield sheet (right)
65 6114-110222 2 Silicon tube (20 mm long)
66 292042 1 Spacer (20 mm long)
67 6114-108938 1 Spacer
68 6114-073975 1 Hall element
69 128113 1 Spacer (18 mm long)
70 531337 2 Plastic elbow tube
71 531355 2 Check valve
72 1114-221509 1 Elbow tube
*
1
For the rear enclosure (Index 9) replacement, the battery label (Index 59) must also be replaced with a new one.
*
2
For the motherboard holder (Index 15) replacement, the motherboard cushion sponge (Index 52) must also be replaced
with a new one.
*
3
For the handle holder base (Index 18) replacement, the inverter board insulation sheet (Index 48) must also be replaced
with a new one.
*
4
For the alarm indicator top cover (Index 20) replacement, the two alarm indicator packings (Index 47) must also be
replaced with new ones.
*
5
For the touch screen (Index E) replacement, the two long and short packings must also be replaced with new ones.
*
6
For the LCD unit (Index F) replacement, the two long and short dust protectors (Index 42, 43 and 86) and shielding tape
(Index 55) must also be replaced with new ones.
*
7
For the main chassis (Index 60) replacement, the insulation sheet for main chassis bottom holder (Index 50) must also be
replaced with a new one.