Service manual

6. MAINTENANCE
6.2 Service Manual BSM-4100
Measuring and Test Equipment
To repair, check, or adjust the instrument, the following measuring and test
equipment or equipment with similar function and performance is required.
Digital Voltmeter
A digital tester with at least 3-1/2 digits LCD display that can measure voltage,
current, and resistance.
Cathode-ray Oscilloscope
An oscilloscope with a bandwidth of more than 1 MHz and a sensitivity of more
than 10 mV/cm.
Function Generator
A function generator with a range of 1 Hz to at least 1 kHz with 1% or better
frequency accuracy.
AX-800P Vital Sign Simulator
The simulator outputs simulated waveforms, i.e. ECG waveform, respiration curve,
4 blood pressure waveforms, 2 temperature fixed values, and cardiac output curve.
548631A Adapter Cable
Although the simulator has the connection cable for previous bedside monitors
such as BSM-2100/3101/7000/8300/8502/8800, the new bedside monitors such as
BSM-1100/2301/4100/9510 and BSS-9800 require this adapter cable instead of
the previous bedside monitor connection cable.
YS-077P1 NIBP Dummy Cuff
A 700 ml container that is needed for some NIBP diagnostic check items.
YS-077P2 NIBP Dummy Cuff
A 250 ml container that is needed for some NIBP diagnostic check items.
YS-073P8 Board/Unit Maintenance Kit
Designed for the maintenance of the boards and units for BSM-4100 series and
WEP-4204/4208.