Service manual

5. DISASSEMBLY AND ASSEMBLY
5.4 Service Manual BSM-4100
8. Remove the binding head screw which secures the side panel to the upper
chassis (power chassis) cover. Remove the side panel from the instrument. 2
screws are visible under the side panel.
NOTE in Assembling the Instrument
Check that the binding head screw which was removed in step 8 is used
to secure the side panel.
The binding head is slightly bigger than a pan head so more torque can
be applied to the side panel with the binding head screw.
9. Remove the 6 screws which secure the upper chassis cover.