Owner`s manual

10/09
4-1.0.0
{ In the event that the unit runs over pressure, the safety valve would reduce the tank pressure to a save level.
Be sure it will work properly. Never run the unit without this safety valve.
{ Do not use petroleum based or other flammable solvents for cleaning. { Routine maintenance insures trouble-free operation and protects your investment. All warranties are void if
maintenance is neglected.
CAUTION
EVERY 6000 RUN HOURSXREPLACE VALVE DISCS HIGH TEMPERATURES AND EXTENDED SERVICE MAY SHORTEN THE TIME BETWEEN HYDRAULIC OIL CHANGES.
XCHANGE HYD OIL
CHANGE HYDRAULIC SYSTEM FILTERXCHECK HYD FILTER
FOR PAO (SYNTHETIC) OIL EVERY 3000 RUN HOURS FOR MINERAL BASED OIL EVERY 1000 RUN HOURSXCHANGE CRANK OIL *
REPLACE AIR FILTER AFTER EVERY 600 RUN HOURSX REMOVE AND CLEAN WITH COMPRESSED AIRXINSPECT AIR FILTER ON-OFF PRESSURES SHOULD BE VERIFIED FOR CONSISTENCY. FURNAS SWITCH ADJUSTMENT.
XCHECK SETTINGS
SUDDEN CHANGE IN PERFORMANCE INDICATES A PROBLEM MAY BE DEVELOPING. INVESTIGATE PROBLEM.
XCHECK COMPRESSOR
OPERATION
WITH POWER OFF, OPEN DRAIN DEVICE TO PURGE WATERXDRAIN AIR TANK SHOULD BE IN LOWER HALF OF SIGHT GLASSXCHECK OIL LEVEL
NOTES
(When both run hours and interval are shown, use whichever comes first!)
2
YEARS
1
YEAR
½
YEAR
PER
MONTH
DAILY
SERVICE PERFORMED
* RECOMMENDED CRANKCASE OILS: SEE INITIAL START-UP PROCEDURE NOTE: Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.
LUBRICATION & MAINTENANCE
SCHEDULE for AC30A