Instructions / Assembly

K
Please note:The Plastic Cylinder N must be between
Adjustment Tube G and Back F.
L
F
A
G
M
N
F
Warm Tip: Please don’t tighten screws before finish assemble.
！
Step 1: Fix 4 legs (Parts B,C, D, E) to Main Seat Frame A separately
using 12X Bolts K (M6×30) as shown in diagram.
Step 2: Link Adjustment Tube G to Back F using Bolts M (M6×20) as shown
in diagram.
Step 3: Connect Back F to Main Seat Frame A using Bolts L (M6×35) as
shown in diagram.