New ZN551 Front Cover Art
Table of Contents Introduction .................................................................. 2 Setup ............................................................................. 4 Battery Installation ..................................................... 4 Battery Saver ............................................................. 4 Code Saver ............................................................... 4 Power-On default ...................................................... 5 TV Punch Through ...
Setup Battery Installation Code Setup 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. The Code Search button is used to setup the remote. You can either setup the remote using the code for your brand of product, from the code tables, or you can search through the library of codes until you find a code that works for your product.
Button Functions Button Functions, cont. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. Prev. Ch. may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must be equipped with Prev. Ch. ability for the Prev. Ch. button to operate this feature.
Advanced Button Functions DVD TV/VCR Punch-Through Scan+ and Scan- buttons control the speed of Fast Forward and Reverse Playback respectively. Chapter+ and Chapter- buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. Subtitle button brings up DVD Subtitle Menu for Subtitle selection and display. Repeat button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.
Code Entry Programming with Code Search Direct Code Entry 1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 3 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press CHANNEL Up.
Code Identification Sleep Timer Code Identification 1. Press and hold Code Search button until the red indicator stays on. Release the Code Search button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Press and release the Code Search button. The indicator light blinks off. 4. To find the first digit for the code stored under the mode key pressed in step 2, press each numeric key from 0-9 in turn.
Code Learning, cont. Code Learning, cont. Learning Commands To Clear all Learned Commands under a mode 1. Press and hold the Code Search button until the red indicator stays on. Release the Code Search button. 2. Press the mode button for the type of device you want to learn (TV, VCR, Cable, etc.). The indicator lights blinks off once. 3. Press the Learn button. 4. Press the button on the Learning Remote that you want to teach, e.g. Power. 5. Point both remotes at each other (see tips on page 11).
Code List FUJITSU ....................................... 206 FUNAI .......................... 206 805 906 FUTURETEC ...................... 805 906 GE ................... 002 006 007 018 107 ................ 114 310 312 502 601 704 ................ 719 803 806 810 901 911 GIBRALTER ........................ 002 713 GOLDSTAR .......... 002 102 117 207 ........................ 217 307 502 818 914 GRUNDY .............................. 206 906 HALLMARK ....................... 002 502 HARVARD ....................
CCE ....................................... 230 826 CITIZEN .............. 025 026 425 525 ............................... 625 725 825 826 COLORTYME ............................. 025 COLT ............................................ 230 CRAIG ................... 230 425 426 525 CURTIS-MATHES .............. 025 124 ........ 130 226 324 425 526 635 725 CYBERNEX ................................. 425 DAEWOO ............ 026 135 625 626 ............................... 726 825 826 926 DAYTRON ....................
GENERAL INSTRUMENTS ..... 058 ........ 066 158 166 258 865 960 965 DSS HITACHI ...................... 765 864 DSS HUGHES SATELLITE ....... 465 ............................... 564 664 864 964 JANEIL ......................................... 261 JERROLD ..................................... 361 JVC ................................................ 466 KENWOOD ................................. 461 LUXOR ......................................... 561 DSS MAGNAVOX ....... 259 565 862 MACOM STATE ..................
Wireless Receiver Product Operation After the batteries are installed and you have programmed the remote for the codes that operate your products, you can use your remote to operate a TV, VCR, Cable Box, CD Player, or Satellite System, etc. The remote transmits wireless radio Frequency (RF) commands. The wireless receiver (included) receives these commands and converts them to regular Infrared (IR) commands.
90 Day Warranty This product is manufactured to ZENITH specifications and is free from defects in material, workmanship and assembly. This warranty extends only to the original purchaser and is nontransferable. Should a defect occur under normal operating conditions within 90 days from the date of purchase, ZENITH will provide a comparable replacement free of charge within the warranty period, to the original purchaser.