User's Manual
AA AI
Controlling X10 Modules
Here’s how to control X10 modules with your Sentinel Remote Control.
The remote is set to House Code A by default.
1. Press and release the X10
button.
2. Use the number buttons to
enter the Unit Code number
of the chosen module. (You
can press 1, then 6 for Unit
Code 16).
3. Press the appro-
priate button
(labeled in blue)
for the function
you require (On,
Off, Bright, Dim,
All Lights On, All
Units Off).
Home Control
Note: when using buttons C1, C2, C3, and C4 to control cameras, they will
also turn on X10 modules set to A1, A2, A3, and A4. To turn these modules
off, use the procedure described above.
HOME CONTROL
The X10 button on the Sentinel Camera’s remote control is your gateway
to a world of useful control and automation solutions built
by X10. Why enter a dark room when there is a simple
and affordable solution that can keep you safe and secure?
From a simple remote control that can turn on a lamp, to a
full-blown automation system, X10 provides you with all the
products you need.
With the correct components in your X10 system, you
can have all of these powerful options at your control:
· Enhance the color, brightness and detail of your
camera’s subject by adding more light automatically
· Give your home a secure appearance by scheduling
when lights and other electronics turn on and off
· Distribute audio and video to stereos and televisions
using wireless technology
· Turn on house lights while sitting in your car
· Schedule sprinkler systems
· Control your lights and electronic devices using your
personal computer
X10’s control and automation products are easy to install and extremely
affordable. Visit X10.com today for more information and the latest
products to build and enhance your X10 system.
FCC & IC CANUION
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND
(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
This equipment generates and uses radio frequency energy, and if not
installed and used properly, that is, in strict accordance with the
manufacturers instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply with the
limits for remote control devices in accordance with the specific cations in
Sub-Parts B and C of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or
television reception, which can be determined by unplugging the
equipment, try to correct the interference by one or more of the following
measures.
· Reorient the antenna of the radio/TV experiencing the interference.
· Relocate the equipment with respect to the radio/TV.
· Move the equipment away from the radio/TV.
· Plug the equipment into an outlet on a different electrical circuit from the
radio/TV experiencing the interference.
· If necessary, consult your local dealer for additional suggestions.
FCC & IC Caution
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
NOTE: Modifications to this product will void the user's authority to
operate this equipment.