INTRODUCTION Your Wireless Audio/Video Sender system consists of a Sender unit which you connect to your satellite receiver, DVD player, etc, and a Receiver unit that you connect to a TV anywhere in your home. The Audio/Video Sender converts the A/V signal from your A/V product into a 900 MHz wireless Radio Frequency (RF) signal and transmits it (even through walls) to the Audio/Video Receiver.
Control S AND CONNECTIONS Audio/Video Sender Audio/Video Receiver RF Antenna {for use with the IR TT Extender feature) 7 Antenna (for use with the IR TT Extender feature) $00 MHz Antenna AMV Out Jacks Power Supply Jack Power Supply Jack ON-OFF Switch ON-OFF Switch
Connecting Up Hooking up the Audio/Video Sender 1 Connect one set of audio/video cables to the AUDIO and VIDEO jacks of your Audio/Video Sender. Take care to match the colors of the plugs on the cable with the jacks on the Audio/Video Sender. Connect the other end of the cable to the audio/video QUT jacks on your TV.
Hooking up the Audio/Video Receiver 1. Connect a set of audio/video cables to the A/V OUT jacks of your Audio/Video Receiver. Connect the other end to your TV. sane to Plug the Audio/Video Receiver’s Power Supply into a 120 volt wall outlet and plug its jack into the Audio/Video Receiver. 3. Position the Audio/Video Receiver in a convenient location such as on top of your TV and orient the antenna so that the Tat side points in the direction of the room where you set up the Audio/Video Sender.
Use THE IR EXTENDER FEATURE The TR extender lets you use your remote to control the A/V product that the A/V Sender is connected to, E.G., if the Sender is connected to a DVD Player, or VCR in your living room, and the Audio/Video Receiver is connected your bedroom; you can control the DVD Player or VCR while watching the picture (rom it on the TV in your bedroom. You do this by pointing your remote control at the Audio/Video Receiver that’s connected to your bedroom TV.
X10 Wireless Technology, Inc. Limited One Year Warranty X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase. If service is required under this warranty: Call 1-800-442-5065, visit www.x10.
