User's Manual

FCC CFCC C

FCC C

AUTIONAUTION

AUTION

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

This equipment generates and uses radio frequency energy, and if not installed and

used properly, that is, in strict accordance with the manufacturers instructions, it

may cause interference to radio and television reception. It has been type tested and

found to comply with the limits for remote control devices in accordance with the

specifications in Sub-Parts B and C of Part 15 of FCC Rules, which are designed to

provide reasonable protection against such interference in a residential installation.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause interference to radio or television

reception, which can be determined by unplugging the equipment, try to correct the

interference by one or more of the following measures.

• Reorient the antenna of the radio/TV experiencing the interference.

• Relocate the equipment with respect to the radio/TV.

• Move the equipment away from the radio/TV.

• Plug the equipment into an outlet on a different electrical circuit from the radio/TV

experiencing the interference.

• If necessary, consult your local Dealer for additional suggestions.

NONO

TETE

: Modifications to this product will void the user's authority to operate this

I I

NTRODUCTIONNTRODUCTION

NTRODUCTION

Your Wireless Motion Activated Camera consists of a Color Video Camera with

built-in 2.4 GHz transmitter. It is activated by its built-in Motion Sensor so that

when someone approaches your home, the camera turns on and also turns on

the attached floodlights to light up the area that the camera sees (bulbs not

included). The camera transmits its picture and sound via a built-in 2.4 GHz

transmitter, to a Video Receiver (sold separately) which you connect to a TV

anywhere in your home. The Camera sends the wireless signals (even through

walls, up to 100 ft.). The Video Receiver converts the signals back to video and

audio signals and feeds them through a cable to your TV's COAX or A/V input

jacks.

You can purchase additional Motion Activated Cameras (up to 4) so you can

have a multiple camera system. You can then set all cameras to the same

channel as the receiver and turn the cameras on and off remotely so as to only

ever have one camera turned on at a time, and displayed on your TV.