User's Manual
1716
3. Press and release the desired Mode
button (TV, VCR, etc.) for Volume/
Mute control, the red indicator blinks
then stays on.
4. Press and release the MUTE button
and the red indicator turns off. The
red indicator will blink rapidly for
three seconds if the Mode you have
selected has no Volume/Mute control.
5. All other Modes will now punch-
through to your chosen Mode for
Volume/Mute control.
6. All “Visual” and “Audio” programmed
Modes will now punch-through to the
respective Modes you have chosen for
Volume/Mute control.
S
ETTING
ANY
M
ODE
TO
USE
ITS
OWN
V
OLUME
/M
UTE
C
ONTROL
This routine can set any Mode to use
only its own Volume/Mute control. Note -
If your chosen Mode has no Volume/
Mute functions of its own then the
Volume/Mute buttons will do nothing.
1. Press and hold the SETUP button until
the red indicator turns on, then
release the button.
2. Press and hold the MUTE button until
the red indicator blinks off, then
release the button.
3. Press and release the desired Mode
button (TV, VCR, etc.), the red
indicator blinks then stays on.
4. Press and release the VOLUME-
(Down) button, the red indicator
blinks then stays on.
5. Press and release the MUTE button
and the red indicator turns off.
6. All “Visual” and “Audio” programmed
Modes will now punch-through to the
respective Modes you have chosen for
Volume/Mute control.
VCR/DVD/DVR P
UNCH
-
T
HROUGH
F
EATURE
,
CONT
.
This feature will not operate if the
programmed TV, SAT or Cable code has
its own VCR transport button control e.g.
a TV Combo, SAT/PVR, etc.
V
OLUME
/M
UTE
C
ONTROL
AND
P
UNCH
-T
HROUGH
F
EATURE
This remote lets you select which device
Mode controls your Volume/Mute
buttons. The remote is initially set (factory
default) for all device Modes
programmed with “Visual” codes (e.g.
TV, VCR, DVD, DVR, SAT & CABLE) and
“Audio” codes (e.g. CD & AUDIO) to use
their own Volume/Mute control if present.
If the programmed “Visual” code has no
Volume/Mute operation of its own then
those buttons will punch-through control
to the TV Mode device without needing to
change to TV Mode. Please refer to the
next page for more information.
Any Mode chosen for Volume/Mute
control MUST have its own Volume/Mute
function or the Volume/Mute buttons will
do nothing.
S
ETTING
ALL V
OLUME
/M
UTE
C
ONTROL
TO
ANY
ONE
M
ODE
This routine can set all Modes to
“punch-through” to any one chosen
Mode for Volume/Mute button control
without the needing to change to that
Mode.
1. Press and hold the SETUP button until
the red indicator turns on, then
release the button.
2. Press and hold the MUTE button until
the red indicator blinks off, then
release the button.