User's Manual

98
SETTING UP
YOUR REMOTE
B
UTTON D ESCRIPTIONS
INDICATOR LIGHT
The indicator light flashes when the
remote is operating.
POWER
Works the same as your original remote.
TV, VCR, CBL, SAT
Used to select the device to control.
X10
Lets you control X10 modules to operate
lamps and appliances around the home.
SET UP
Used for programming the remote.
LAST
Selects the last channel viewed on your
TV, VCR, or Cable Box.
CHANNEL +/-
Works like your original remote. Also
used to switch X10 modules on and off.
VOLUME +/-
Works like your original remote. Also
used to brighten and dim lamps
connected to X10 Modules.
MUTE
Works the same as your original remote.
0-9
Used as your original remote and to enter
device codes.
ENTER
Same as your original remote.
A-B
Toggles between TV and Video Mode.
MENU
Access the Menu function of the device
you are controlling (if available).
EXIT Used to exit Menu functions.
NAVIGATION ARROWS
Used to navigate and adjust Menu items
of the device you are controlling.
OK
Select Menu items of the device you are
controlling.
PLAY, REW, FF, STOP, PAUSE, REC
Work the same as on your original
remote. You must press the REC button
twice to begin recording.
A, B, C, D
Used for extra functions in certain modes.
1. Set the House
Code to ‘A’ and the
Unit Code to ‘2.’
2. Plug a lamp into
the Lamp Module.
3. Plug the Lamp
Module into a
convenient AC
outlet.
X10 P LATINUM R EMOTE
The X10 Platinum Remote lets you control
practically everything electrical in your
home. It has IR technology that lets you
control your TV, VCR, Cable and CD or
DVD player, and X10 RF technology that
lets you control lamps and appliances
anywhere in your home.
To find out more about configuring the
X10 Platinum Remote to work with your
audio/video equipment, see the section
titled “Setting Up your Remote.”
1. Push the tab and lift
off the battery
cover.
2. Insert two AAA
batteries, taking
care to match the
+ and - marks in
the battery
compartment.