POWER VCR TV DIRECTV SET DVD AUX INFO GUIDE MENU EXIT OK/I CALLER R ID G FREEZE AUDIO INPUT TV/VIDEO B SEARCH GAME C H AN P AG E HELP VOL VO L BACK P AG E quick WHO CHAN SCAN PLAY SCAN REC STOP PAUSE SRF2 Owner’s Manual
Table of Contents Introduction ...................................................... 3 Setup ............................................................... 4 Battery Installation ....................................... 4 Battery Saver ............................................... 4 Code Saver ................................................. 4 Power-On default ........................................ 4 TV Punch Through Feature .......................... 5 VCR/DVD Punch Through Feature ..............
Setup Setup, cont. TV Volume/Mute Punch-Through Feature 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. The TV Volume/Mute punch-through feature lets you control the Volume and Mute function of your TV in any mode programmed to be a VCR, DVD, CABLE or SAT device, without needing to change to TV mode.
Button Functions, cont. Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. BACK may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have BACK ability for the BACK button to operate this feature. Red Indicator Lights when any button is pressed.
Advanced Functions INFO Press this button when you are watching DirecTV® programming to display the Channel Banner information and information about the current program. HELP Displays instructions about the screen or menu currently displayed. WHO Press to change the current user profile. QUICK Press this button to view the Quick Guide. MENU Press this button to display the on-screen menu. GUIDE Press to view the on-screen program guide.
Code Entry Advanced Functions, cont. TV/VCR/INPUT Direct Code Entry When in TV mode the TV/VIDEO/INPUT button performs the INPUT source switch function. 1. Press and hold the SET button until the red indicator stays on, then release the SET button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 3 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off.
Code Entry, cont. Code Entry, cont. Programming with Code Search Code Search by Brand If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the SET button until the red indicator stays on, then release the SET button. 3. Press and quickly release the desired mode button (TV, VCR, etc.).
Code Entry, cont. Code Identification Code Identification Feature Look up your brand in the appropriate column (TV, VCR, etc.). Look to see what digit (1, 2, 3, etc.) applies to your brand, and enter it in step 4 of “Code Search by Brand” on the previous page. The Code Identification Feature allows you to identify the three digit library code stored under your device key.
Product Operation Wireless Receiver After the batteries are installed and you have programmed the remote for the codes that operate your products, you can use your remote to operate a TV, VCR, DirecTV, DVD Player, etc. The remote transmits wireless Radio Frequency (RF) commands. The wireless receiver (included) receives these commands and converts them to regular Infrared (IR) commands. These IR commands are then emitted from the IR Extender (also included) to control your A/V components.
Troubleshooting Notes Remote does not operate your product. • • • • Press the mode button of the product you want to control. Program the remote with a new code. Install new batteries. (You might have to reprogram your remote after installing new batteries.) Remote may not be compatible with your product. Remote does not operate some features of your product. • • Program remote with a new code.
90 Day Warranty This product is manufactured to SAMSUNG specifications and is free from defects in material, workmanship and assembly. This warranty extends only to the original purchaser and is nontransferable. Should a defect occur under normal operating conditions within 90 days from the date of purchase, SAMSUNG will provide a comparable replacement free of charge within the warranty period, to the original purchaser.
