User's Manual

13
English
Programmed playback
In the 1. Stop mode, press the Menu button twice.
With the 2. Skip Forward button select PROG.
Conrm the input with 3. Menu.
Now, select the rst title with the 4. Skip button.
Conrm the chosen title with 5. Play.
Repeat the last two steps until all titles are stored. 6.
To start the programmed playback, press 7. Menu again.
To interrupt the programmed playback, press 8. Stop.
To stop the function, press 9. Menu twice and then press Skip Forward, as often as necessary
until the display at the lower edge of the screen goes out.
Finally press 10. Menu again, to conrm the input.
Muting function
While playing back the CD, press the Snooze button to turn off the sound. Press the same button
again to turn the sound back on.
Automatic switch off
In CD operation, press 1. Menu and then Skip, as often as necessary until Sleep appears.
After pressing the 2. Menu button again, you can use the volume button to set the number of
minutes until the playback function is to switch off.
At the setting 3. Off, the function is deactivated.
Conrm the input with 4. Menu.
Pairing the remote control
Please remove the battery protection plastic tab.1.
Switch the radio into 2. Stand By mode.
Press and hold 3. Mode and Tun+ to pair the remote control.
Press and hold 4. Mode and Tun- to unpair the remote control.