User's Manual

1514
Sleep TimerCode Identification
1, 3.
2.
4.
The Sleep feature enables the remote to turn off the TV after a
period of 1 to 99 minutes. Remote is to be in TV mode to set a
Sleep Timer. This feature works even if your TV does not have
this feature.
1. Press and release the TV Mode button.
2. Press and hold the SLEEP button until red indicator remains on
(occurring after approx. 2-3 seconds).
3. Release the SLEEP button.
4. Press and release the numeric buttons (01-99) for the time
required. The red indicator blinks off to indicate button press
acceptance and remains off after the second button press.
5. TV Sleep Timer now set.
6. Leave the Remote pointing towards the TV with an
unobstructed path.
To cancel the Sleep Timer, press and hold the SLEEP button for 2-3
seconds until the red indicator blinks or press and release the
POWER button in TV Mode.
The Code Identification Feature allows you to identify the three
digit library code stored under your device key. For example, if you
want to find out what three digit code is stored under your TV
device key, follow the six steps below:
1. Press and hold the CODE SEARCH button until the red
indicator stays on. Release the CODE SEARCH button.
2. Press and release the desired mode button (TV, VCR, etc.). The
red indicator blinks, then stays lit.
3. Press and release the CODE SEARCH button. The red indicator
blinks off.
4. To find the first digit for the code stored under the mode key
pressed in step 2, press each numeric key from 0-9 in turn.
When the red indicator blinks off the number you pressed is
the first digit for the code you are searching for.
5. To find the second digit, repeat step 4, this time when the red
indicator blinks off this is the second digit.
6. Repeat step 4 again to find the third digit.