User's Manual

1918
1, 4.
2.
3.
1, 3. 2.
Code Learning, cont.
Code Learning, cont.
To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you replace
your CD player with another brand or model. If you had learned a
feature from your old CD player’s original remote on to this remote
(such as RANDOM PLAY), that feature would no longer work for
your new CD player. Should you wish to remove or clear one or
more “learned” Modes, follow the steps below:
1. Press and hold the CODE SEARCH button until the red
indicator turns on. Release the CODE SEARCH button.
2. Press and release the button for the mode you want to clear
(TV, VCR, etc.). The red indicator blinks off.
3. Press and release the LEARN button TWICE. The red indicator
blinks off.
4. Press and release the CODE SEARCH button. The red indicator
turns off. All learned Commands under that mode are now
cleared.
Master Clear - To Clear all Learned Commands
under all modes
1. Press and hold the CODE SEARCH button until the red
indicator turns on. Release the CODE SEARCH button.
2. Press and release the LEARN button TWICE. The red indicator
blinks off.
3. Press and release the CODE SEARCH button. The red indicator
turns off. All Learned commands in the remote are now cleared.