User's Manual

Learning Side Keys, cont.

key on the remote to enter the letter D.

Then we pressed the 8 key repeatedly

until the letter V was displayed. Then

we waited a second and pressed 3 to

select D. Then we pressed the 0 (zero)

key twice until we selected a space. We

continued this process until we had

“DVD Zoom” displayed.

Then we pressed OK to save the new

Note: “Triple tap” name entry works in a similar fashion to

text entry on a cell phone. Tap each numeric key to cycle

through ALL caps, numbers, and lower case letters. E.g.,

repeatedly pressing the number 2 key cycles through A, B, C,

2, a, b, c. Pressing the 9 key cycles through W, X, Y, Z, 9, w,

x, y, z. A “space” can be selected with the 0 (zero) key. The

number 1 key selects 1 . @ ? ! - & : and back to 1. And you

can backspace an entry with the key to the left of the 0 (zero)

key. Press OK (or the Enter “E” key) to confirm your new

name.

label for the key we had learned.

The next time you set the remote to the

mode that you learned this key under

you’ll see a screen where you can

select this, and any other functions

you’ve learned under that mode.

Pressing the MODE key and then

selecting a device type shows the “extra” keys and learned

keys for that mode. Note, you can learn keys from any kind of

remote under any mode. You could for example learn the

power keys for your TV, and your audio system and extra keys

for your DVD player under the DVD mode. Then when you

press the MODE key and select DVD, you’ll be able to turn

on your TV, turn on your audio system, and control your DVD

player, all from the Side Keys on this one screen.