User's Manual

Step by step instruction to developing MOOD SETTINGS
A Quick Note before You Program the Mood Settings:
In the Lamp Receiver section you learned how to set up individual LAMP RECEIVERs. These LAMP RECEIVERs are turned on and off by
pressing the appropriate rocker switch that corresponds to the receivers unique UNIT CODE. The purpose of the MOOD buttons (blue) are to link
multiple receivers (up to 4) so that they can be turned on or off by the MOOD button. See Figure 16.
Example: If you have a LAMP RECEIVER in one room and it is set to the number 7 on its UNIT CODE and you have another LAMP RECEIVER
in another room and it is set up to the number 13 on its UNIT CODE, the two lamps can be turned on at the same time using a MOOD.
Step1:
With the MESSENGER HUB still plugged into an AC outlet, set the slide switch to LEARN as shown in Figure 15.
Step 2:
While facing the MESSENGER HUB, press MOOD 1 ON switch on the INDOOR REMOTE. Figure 16 -
The MESSENGER HUB’s green indicator light will flash.
Step 3:
Set the UNIT CODE dial of the INDOOR REMOTE to match the UNIT CODE of the LAMP RECEIVER
that you want to turn on and off. Press on the rocker switch (white) corresponding to that LAMP
RECEIVER as shown in Figure 17. Wait for the MESSENGER HUB indicator to flash indicating the code
has been stored in the MOOD function.
Step 4:
Repeat step 3 a maximum of 3 more times to link up to 4 LAMP RECEIVERs / BULB RECEIVERs with
that MOOD key. The 4 LAMP RECEIVERs can be in any combination of UNIT CODES.
Step 5:
Return the slide switch on the MESSENGER HUB to RUN - Figure 18. The ON/OFF button of MOOD1 will now turn
on and off all of the LAMP RECEIVERs / BULB RECEIVERs that were linked in Step 4. There may be up to a 3 second
delay between the time that you press the button and the time that the lights respond.
Step 6:
To set up MOOD 2 key, repeat steps 1 thru 5 substituting MOOD 2 key for MOOD 1.
NOTE: Pressing either MOOD ON key while in LEARN mode clears all stored codes for that MOOD.
Using ALL on, ALL off House Button
Pressing the INDOOR REMOTE HOUSE BUTTON (figure 19) on and off will activate the MESSENGER HUB and ALL the
LAMP RECEIVERs / BULB RECEIVERs set to the system’s HOUSE CODE.
8
MOOD 2MOOD 1 HOUSE
ON
OFF
ON
OFF
ON
OFF
16
ON ON ON
ON OFF
3
4
6
7
5
9
8
17
18
HOUSE
ON
OFF
15
ON
OFF
ON
OFF
ON
OFF
ON OFF
2
3
4
5
MOOD 2MOOD 1 HOUSE
ON
OFF
ON
OFF
ON
OFF
Unit Code Dial
House Code Dial
Run / Learn Slide Switch
Rocker Switch
Mood Button
House Button
Rocker Switch
13
14
19
Home Auto Manual large NEWEST 4/24/03 3:40 PM Page 8