Full Product Manual

90
NOTE
1. Autel accepts no responsibility for any accident or injury arising from
servicing the SAS system. When interpreting DTCs retrieved from the
vehicle, always follow the manufacturer’s recommendation for repair.
2. All software screens shown in this manual are examples, actual test
screens may vary by test vehicle. Pay attention to the menu titles and
onscreen instructions to make correct option selections.
3. Before starting procedure, make sure vehicle has ESC. Look for button
on dash.
Using a Land Rover as an example.
1. Tap the Service application button on the MaxiPRO Job Menu.
2. Tap SAS button. The vehicle manufacturer selection screen displays.
Tap VIN Scan or the vehicle manufacturer to acquire vehicle VIN
information and tap Yes to confirm. See Vehicle Identification on page
17 for details.
3. Tap the desired service in the SAS function list, the list may vary by test
vehicle.
Steering Angle Sensor Calibration
This function allows users to perform steering angle sensor calibration, clear
records and clear counter. The function options vary by vehicle.
Figure 6-18 Sample SAS Function Menu