Full Product Manual

Programming

The programming function is used to program the sensor data to the MX-

Sensor and replace the faulty sensor.

There are three options available when programming MX-Sensor using the

OEM Part No. function: Copy by Activation, Copy by Input, and Auto

Create. Refer to Sensor Programming on page 62.

NOTE

Auto Create in this section can program up to 20 MX-Sensors at a time.

The PSN Code (Part Serial Number), which is printed on the MX-Sensor,

acts as a reference to identify the corresponding sensor ID. This can be

especially useful when programming multiple MX-Sensors.

Support

Support will display the correct vehicle types for the selected OEM part

number.

To conduct additional procedures such as Diagnosis and Relearn, select the

correct test vehicle model and then tap Enter Vehicle at the bottom left of

the screen. Refer to TPMS Diagnosis on page 56 and TPMS Relearn on page

68 for more details about the comprehensive TPMS functions menu.

Figure 5-34 Sample Programming Screen via OEM Part No.