Full Product Manual

2) From Unit of Measure screen, use the LEFT/RIGHT scroll button to

select the desired unit of measurement.

3) Press the OK button to save your selection and return to previous menu.

Or, press the ESC button to exit without saving.

Beep Set

 The default setting is Beep On.

This function allows you to turn on/off the built-in speaker as an indicator

during diagnostic testing.

1) From System Setup screen, use the UP/DOWN scroll button and

LEFT/RIGHT scroll button to select Beep and press the OK button.

2) From Beep Set menu, use the LEFT/RIGHT scroll button to select ON

or OFF to turn on/off the beep.

3) Press the OK button to save your selection and return to previous menu.

Or press the ESC button to exit without saving.

Key Test

The Key Test function checks if the keyboard is working properly.

1) From System Setup screen, use the UP/DOWN scroll button and

LEFT/RIGHT scroll button to select Key Test, and press the OK button.

Figure 7-4 Sample Beep Set Screen