Full Product Manual

35
 If the vehicle being tested does not support the mode, an advisory
message will display on the screen.
Figure 4-23 Sample Nonsupport Screen
 For CAN-equipped vehicles, test selections may be as depicted
as below:
Figure 4-24 Sample Test Data Screen
6) Press ESC button to return to the previous menu.
Component Test
The Component Test initiates a leak test for the vehicle's EVAP system. The
scan tool itself does not perform the leak test, but commands the vehicle's
on-board computer to start the test. Different vehicle manufacturers might
use different criteria and methods for stopping the test once it has been