Full Product Manual

Freeze Frame

Freeze Frame Data allows the technician to view the vehicle’s operating

parameters at the moment a DTC (Diagnostic Trouble Code) is detected.

For example, the parameters may include engine speed (RPM), engine

coolant temperature (ECT), or vehicle speed sensor (VSS) etc. This

information will aid the technician by allowing the parameters to be

duplicated for diagnostic and repair purposes.

1) To view freeze frame data, use the UP/DOWN scroll button to select

Freeze Frame from Diagnostic Menu and press the OK button (Figure

4-1).

2) Wait while the scan tool validates the PID MAP.

3) If retrieved information displays on more than one screen, use the

DOWN scroll button, as necessary, until all the data have been shown

up.

 If no freeze frame data is available, the message “No freeze

frame data stored!” displays.

4) Select Save to record freeze frame. A confirming message “Save

success!” shows on the display and scan tool return to previous menu.

5) If you don’t want to save the freeze frame data, press ESC button to

return to previous screen.

Figure 4-13 Sample Freeze Frame Screen