Manualshelf

Full Product Manual

ManualsBrandsAutel ManualsAutomotiveML619 OBDII Diagnostics with ABS
41424344454647484950
43
11) Select the Control Unit entry to enter the System Menu option screen,
and choose the desired Control Module entry for DTC information
stored in the vehicle’s on-board computer.
Figure 5-8
If there is not any Diagnostic Trouble Code, the display indicates
“No (pending) codes are stored in the module!” Wait a few
seconds or press any key to return to previous screen.
NOTE
1. In this manner, the scan tool will communicate with the vehicle being
tested. If there is a linking error, please refer to 3.8 Product
Troubleshooting.
2. If the vehicle does not support ABS/SRS communication, an advisory
message shows on the Scan Tool’s display. Follow the screen
instruction to exit the system.