Full Product Manual

40
NOTE
You may not need to make all the selections, or have to select other
features. For some vehicles, the tool will not ask for any information before
turning to the Function menu.
6) Use the UP/DOWN scroll button to select the desired control module
from the retrieved engine data menu (in GM’s case, the selected
engine model: 3.6 L (LFX)), and press the OK button.
7) To review the Diagnostic Trouble Codes (DTC) or Module ID
Information saved in the Supplemental Inflatable Restraint or
Electronic Brake Control Module system, use the UP/DOWN scroll
button to select the desired item. Then press OK button to continue.
8) Wait a few seconds while the Scan Tool establishes communication
with the vehicle to retrieve the selected DTCs or Module ID
Information.
Manual Vehicle Entry
Manual Vehicle Entry allows users to input and save specific vehicle
information (i.e. Vehicle Calibration Number, Tear Tag, or PCM Part
Number) manually. This function enables direct access to the vehicle’s
ABS/SRS system and makes the diagnostic testing more convenient,
saving time doing step-by-step entry selections.
To finish this procedure, please follow these steps (Take Ford as an
example):
1) Select the Ford Logo from the car make screen.
2) Use the UP/DOWN scroll button to select the Manual Vehicle Entry
option from the DAS menu.
3) To enable scan tool to identify the vehicle specifications, follow the
onscreen instructions to the Option menu, and select one of the three
entries: PCM Part Number, Calibration Number or Tear Tag to fill up
the vehicle information.
4) Taking the Tear Tag option for example, you will need to fill up
accurate vehicle information in the input entry on the menu screen.
5) Follow the onscreen instruction to save the information and continue
on the procedure, or select the No option or press ESC button to exit
without saving.
6) Choose a specific car series from the Vehicle Specification menu