Full Product Manual

20
Figure 4-2
2) Use the UP/DOWN scroll button to select Stored Codes, Pending
Codes or Permanent Codes from the Read Codes menu and press
the OK button.
 If no codes are found, a message will display “No (pending)
codes are stored in the module!” Wait a moment or press any
key to return to previous screen.
NOTE
Permanent Codes function is available only for vehicles supporting the CAN
protocols.
3) View DTCs and their definitions on screen.
4) If more than one DTC is found, use the UP/DOWN scroll button to
review each code.
 If retrieved DTCs contain any manufacturer specific or enhanced
codes, a “Manufacturer specific codes are found! Press any key to
select vehicle make!” message comes up prompting you to select
vehicle manufacturer to view DTC definitions. Use UP/DOWN
scroll button to select manufacturer and then press OK button to
confirm.
Figure 4-3