Full Product Manual

12
Figure 2-4
Unit of Measure
Metric is the default measurement unit.
1) From System Setup screen, use the LEFT/RIGHT scroll button to
select EN/METRIC and press the OK button.
2) From Unit of Measure screen, use the LEFT/RIGHT scroll button to
select the desired unit of measurement.
Figure 2-5
3) Press the OK button to save your selection and return to previous
menu. Or, press the ESC button to exit without saving.
Beep Set
The default setting is Beep On.
1) From System Setup screen, use the UP/DOWN scroll button and
LEFT/RIGHT scroll button to select Beep and press the OK button.
2) From Beep Set menu, use the LEFT/RIGHT scroll button to select ON
or OFF to turn on/off the beep.